Are you tired of glass railing installs turning into hours of rework from the smallest misalignment? Do risky edge adjustments or fiddly hardware keep slowing your team down?
At ONLEVEL, we’ve worked with hundreds of installers across Europe to eliminate those exact issues, and Turboflex is the result.
In this article, you’ll learn how Turboflex differs from traditional systems across 9 key areas, so you can decide whether it’s the right fit for your next project.
9 Facts about Turboflex: How it’s Faster and Safer Than Other Glass Railing Systems
1. Direct at Glass Adjustment: Faster, Cleaner Install
Most systems force you to adjust from the base or wedge the glass from both sides, requiring trial-and-error tweaking. Turboflex flips that.
The adjustment happens directly at the glass panel, meaning:
- Less fiddling with base parts
- More accurate alignment from the start
- Faster first-time-right results
For installers, that means you don’t need to touch the base again after placing the glass, the fixing follows the glass, not the other way around.
2. Done in 3 Minutes
With the Turboflex system, glass panels can be installed in 3 minutes. The design optimizes every phase of the glass installation process, turning time-consuming complexity into rapid execution. Here’s how:
- No post-install glass correction: Once aligned, it stays aligned. No revisits, no rework.
- User-side adjustment: Everything happens from the safe side of the railing, no scaffolding, no acrobatics.
- Minimal rework: Fewer tools, fewer mistakes, faster finish.
- Certified torque tool: One key element that sets Turboflex apart.
3. Only one tool needed
Every Turboflex system is tightened using a dedicated 6Nm torque tool, designed to ensure precise, certified tightening of the fixing screws. Unlike conventional systems, Turboflex eliminates ambiguity by standardizing the torque applied:
- Guarantees each fastening complies with Turboflex certifications
- Ensures every installer achieves consistent, reliable performance
- Reduces variability and potential installation faults
- Reinforces peace of mind on-site: especially for high-traffic or high-risk applications
This seemingly small tool delivers big confidence, ensuring the job gets done right the first time.
For metalworkers with a tight schedule of contractors juggling multiple trades, this precision-first approach translates to more meters installed per day, and more projects completed on time.
4. It Automatically Handles Glass Tolerances
Tolerances in the production of laminated glass add up quickly. Each layer has its own tolerance, especially the interlayer in laminated glass adds to the total thickness tolerance. These tolerances cause difficulties, in many situations, in the mounting and adjustment of the glass panels.
Turboflex is designed to compensate for the tolerances in glass thickness, absorbing these tolerances smoothly with its full-surface clamping system.
No gaps. No stress fractures. Just a snug, reliable fit.
5. Installation from User-Side
Turboflex is designed for complete user-side installation, meaning the entire process takes place from the safe side of the railing. This means:
- No scaffolding.
- No leaning over balconies.
- No elevated risk.
This makes Turboflex an ideal solution for high-rise façades, narrow stairwells, and other limited-access job sites where external access is difficult or dangerous.
6. It’s Fully Plannable
Turboflex is designed to support accurate project planning by reducing the variables typically encountered during installation:
- Installation time can be estimated with a high degree of confidence
- Factory-set tolerances help minimize on-site adjustments
- Predictable workflows support more consistent costing
For contractors and project managers, this translates into better schedule control and fewer unexpected delays.
7. Optional Height Adjustment (±3mm Optional)
Even with perfect planning, site conditions vary. Uneven substrates or stair runs can throw off alignments, unless you have built-in height adjustability.
Turboflex’s optional height adjuster lets you shift the pane ±3 mm vertically on each corner, allowing for razor-sharp spacing between glass panels across multiple panels without custom shimming.
8. Premium Materials = Premium Safety
Turboflex is fast and safe. Using premium quality materials and German design.
- Uses stainless steel fixing components
- Using glass enforce plastic components
- Engineered to withstand 1.0 kN loads
- Fully certified to meet EU regulations
For professionals who can’t afford callbacks or liability issues, this is non-negotiable peace of mind.
9. Full-Surface Clamping for Long-Term Durability
Many systems clamp glass at isolated contact lines, which leads to stress spikes. Turboflex ensures full-surface pressure that matches the glass angle, even if it’s not perfectly vertical.
The result? No stress lines. No long-term weakening. Just strength, spread evenly.
Where Turboflex Not Be the Right Fit
At ONLEVEL, we believe in transparency. While Turboflex is ideal for 90% of use cases, it might not be the best choice for:
- Curved glass balustrades: For these applications, we recommend the ONLEVEL Bend-Fit system.
- Fully recessed floor installations: These don´t require a profile as strong as Turboflex. In this case, the ONLEVEL TL-1010 system is a better fit.
If you have other doubts about your specific installation needs, we are here to provide tailored guidance.
Why Turboflex Was Built for You
Turboflex was designed in direct response to the most common frustrations we heard from installers: misalignments, risky adjustments, and wasted time on rework. If those challenges sound familiar, it might be worth seeing how Turboflex compares in action.
Want to explore it further? See Turboflex in action or request a demo box today.Still not sure? Ask us for the Turboflex Money Saver tool to see how much you can save on your next project.